• Descatalogado
35943c_orig.jpg
  • 35943c_orig.jpg
  • 2f35943c_orig.jpg
35943c_orig.jpg
35943c_orig.jpg 2f35943c_orig.jpg

LCD module HP Pavilion X360 13-S Series 30 Pines CI 1920x1080 30 Pines 809832-888 029A0D302A

Código PCXeon: 38331

Marca: HP | Part Number: 809832-888

Estado: Nuevo | EAN: 0799862363209

HP
Portes gratis
No units available
Out stock
€110.00
90,91 € without VAT
Out stock

Este producto no está disponible en este momento. Podemos enviarle un aviso cuando esté disponible si nos facilita su email.

Información básica sobre protección de datos (RGPD|LOPD-gdd)

Responsable: PCXEON TECHNOLOGY, S.L.U.
Finalidad: Envío de información periódica de nuestras actividades, productos y/o servicios por medios electrónicos.
Legitimación: Consentimiento del interesado.
Destinatarios: No se cederán datos a terceros, salvo obligación legal.
Derechos: Acceder, rectificar, limitar y suprimir los datos, así como presentar una reclamación ante la autoridad nacional de control, como se explica en la información adicional.
Información Adicional: Puede consultar la información adicional y detallada sobre Protección de Datos en nuestra "Política de Privacidad"

I have read and accept the PCXEON Privacy Policy.
Producto Original

Part Number LED screen : LTN133HL03-201 , 09T7WM , LP133WF2 (SP)(L1) , ...

Part Number Screen Tactil : 029A0D302A , ...

Part Number of the Set : 809832-888 .

Connector 30 Pines Down to the IZQUIERDA.

Resolution: FHD (1920X1080)

This product includes LED Display and all assembled Tactile Display.

Compatible with Portables as :

HP Pavilion X360 13-S Series
HP Pavilion X360 13-S120NR
HP Pavilion X360 13-S120CA
HP Pavilion X360 13-S122NR
HP Pavilion X360 13-S128NR
HP Pavilion X360 13-S138CA

 

*** ATTENTION ***

Please Be sure to install, mount, paste, etc.. NOT remove the plastic protectors that wear the screen. Before you have to Pre mount it and prove that the screen works properly as All Tactiles or LCD or LED screen should be tested overlays. NO GARANTIA TYPE or DEVOLUTION will be accepted once the protections are withdrawn, manipulated or without them.

Once the protectors are removed, it will be understood that the screen has been installed on the device and from that time no damage or defects can be claimed. The manufacturer only accepts screen warranty without having been installed, because, due to its fragility during installation can be broken. Normally in 95% of cases is due to incompatibility of the same, not because it does not work properly.